User's Manual

Setting the Sound
37
OWNER'S MANUAL
Your the monitor has four automatic sound settings (Standard, Movie, Music and News) that are preset
at the factory. You can activate either Standard, Movie, Music, or News by pressing SOUND on the remote
control (or by making a selection from the menu) or you can select Custom which automatically recalls your
personalized sound settings.
Press Menu/Set button to display the main OSD menu.
Select the Sound main menu.
Press Menu/Set button to enter the sub menu.
Select Sound Mode and press Menu/Set button to
enter the sub menu. Then the mode sub menu appear.
Select the User setting and press Menu/Set
button.
You will see the equalizer bars. Just press Back
button on the remote control. You can adjust each
values of equalizer, but the changed values are
stored as in User mode.
User mode require more settings.
It has sub menu: See next page.
In Sound menu, you can adjust balance, MTS ( Multi-Track Sound), AVC (Auto Volume Control) and select
the equalizer settings.
This control allows you to adjust the balance of the left and right speaker output.
Press Menu/Set button to display the main OSD menu.
Select the Sound main menu.
Press Menu/Set button to enter the sub menu.
Select Balance and press Menu/Set button.
Adjust the Balance with VOL+/VOL- button and
press Menu/Set button.
Adjusting the Sound Balance
Changing the Sound Mode
1
2
3
4
5
1
2
3
4
5
6
Balance
Sound Mode
Spatial Effect
AVC
MTS
User
¥ OFF 
¥
OFF 
Stereo
Standard
Movie
Music
News
User
Balance
Sound Mode
Spatial Effect
AVC
MTS
User
¥ OFF 
¥
OFF 
Stereo
0.1 0.5 1.5 5.0 10.0kHz
Equalizer