User's Manual

OWNER'S MANUAL

PICTURE ( PC )

• Geometry

In PC mode, you can adjust the H,V-Position, Clock and Phase. Also you can adjust them

automatically.

You can change H, V-Position, Clock and Phase in PC mode like usual PC monitors. You can

also adjust them automatically. (Auto adjust function.)

1. Select the item to adjust with

CH-, CH+ button.

2. Press Menu/Set button.

3. Then the cursor moves on the

bar and you can adjust the

value with VOL-, VOL+ button.

4. To adjust these items,

automatically, select Auto

Adjust and press Menu/Set

button.

G e o m e t r y

N o r m a lT e m p e r a t u r e

S t a n d a r dM o d e

1. Press Menu/set button to display

the main OSD menu.

2. Select the picture main menu

with CH+, CH- button.

3. Press Menu/Set to enter the sub

menu.

4. Select Geometry and press

Menu/Set to enter the under

menu. Then the picture

Geometry under menu will

appear.

A u t o A d j u s t

◄ 1366 ►

N a t I v e H

–

S I z e

◄O N ►

N a t i v e Mode

ІІІІІІІ│ІІІІІІІІІІІІІІІІІІІІІІІ

P h a s e

ІІІІІІІІІІІІ│ІІІІІІІІІІІІІІІІІІ

V-Position

ІІІІІІІІІІІІІІІІІІІІІІ│ІІІІІІІІ

H-Position

* For more detail description refer to the next page.

*You can select the H-Size of Native Mode depending

on the input timing (1360/1366 selection)