User's Manual

OWNER'S MANUAL
26
CHANNEL (TV)
You can enter the TV menu in TV mode only. (When you watch a TV channel.)
Store TV channels
• Channel Type
Before your television can begin memorizing the available channels, you must
specify the type of signal source that is connected to the TV (i.e., an antenna,
a standard cable system, an HRC, or an IRC).
◄
CATV 5
►
C H
F i n e t u n e
A u t o S c a n
◄
CATV
►
C h a n n e l T y p e
◄
CATV 5
►
C H
F i n e t u n e
A u t o S c a n
◄
CATV
►
C h a n n e l T y p e
1. Press Menu/Set button to display the
main OSD menu.
2. Select the TV main menu item.
3. Press Menu/Set to enter the sub
menu.
4. Select Channel Type and press
VOL+ button to enter the ◄► parts.
Then the cursor moves into the ◄►
parts.
5. Select the channel type with CH+/CH-
button and press BACK button. You
can select AIR, CATV (Cable TV), IRC
or HRC.
• Auto Scan
Only scanned programmes can be stored as Favorite programmes.
1. Press Menu/set button on the remote
control to display the main OSD menu.
2. Select the TV main menu with CH+ / CH-
key on the remote control.
3. Press Menu/Set button to enter the sub
menu.
4. Select Manual Scan with CH+ / CH-
button and press Menu/Set button.
Menu/Set: EXIT◄► : Move
ІІІІІІІІІІІІІІІІІІІІІІІІ│ІІІІІІІІІІІІІІІІІІІІІІІІІІІІІІІІІІІІІІІІІІІІ
16Manual Scan
◄
CATV 5
►
C H
F i n e t u n e
A u t o S c a n
◄
CATV
►
C h a n n e l T y p e