User's Manual

BASIC OPERATIONS
24
4. Press the key or the PTT key. The radio rings until the called party answers the call. When the called
party answers the call, their voice audio will be heard in the radio’s speaker.
5. To transmit to the called party, press and hold the key or the PTT key and speak into the microphone
at a normal voice level.
6. Release the key to stop transmitting, and listen for a reply.
Transmitting a Telephone Interconnect Call via the ReDial or the BackDial Call Logs
1. While in the home screen, press the key to access the ReDial Call Log, or press the key to
access the BackDial Call Log.
2. Press the Up/Down key to select the desired telephone interconnect call contact for calling.
3. Press the key or the PTT key. The radio rings until the called party answers the call. When the called
party answers the call, their voice audio will be heard in the radio’s speaker.
4. To transmit to the called party, press and hold the key or the PTT key and speak into the microphone
at a normal voice level.
5. Release the key to stop transmitting, and listen for a reply.
Transmitting a Telephone Interconnect Call via Manual Dial
1. While in the home screen, use the radio’s keypad to enter the number of the contact desired for calling. For
the valid numeric range, see the
MANUAL DIAL section on page 51. Number entry format is as follows:
For PSTN Telephone Interconnect Systems:
• Format for CPS-P/CPS-P3 Dialing Rules: 01 + PSTN number
• Format for 1343-E Dialing Rules:
*
01
*
+ PSTN number
For PABX Telephone Interconnect Systems:
• Format for CPS-P/CPS-P3 Dialing: 02 + PABX number