User's Manual
Table Of Contents
- 1 SAFETY SYMBOL CONVENTIONS
- SPECIFICATIONS
- 3 INTRODUCTION
- 4 UNPACKING AND CHECKING THE EQUIPMENT
- 5 PLANNING THE INSTALLATION
- 6 ANTENNA INSTALLATION
- 6.1 ANTENNA MOUNTING LOCATIONS
- 6.2 ANTENNA INSTALLATION PROCEDURES
- 6.2.1 Installing NMO Antenna Mounts AN125001-001, 002, 003 and 004
- 6.2.2 Installing NMO Magnetic Antenna Mounts AN125001-007 and AN125001-008
- 6.2.3 Installing All Other Antenna Mounts
- 6.2.4 Attaching NMO Antenna Elements
- 6.2.5 Installing the Coax Cable and TNC RF Connector
- 6.2.6 Install GPS Antenna (Required Only if Radio has GPS Receiver Option)
- 7 RADIO INSTALLATION
- 8 CH25 REMOTE CONTROL HEAD INSTALLATION
- 9 EXTERNAL SPEAKER INSTALLATION (OPTIONAL)
- 10 MICROPHONE ATTACHMENT
- 11 OPTIONAL CABLES
- 12 GPS NMEA-FORMATTED DATA CONNECTION
- 13 MOBILE DATA CONNECTION
- 14 INITIAL POWER-UP TEST
- 15 PERFORMANCE TESTS
- 16 COMPLETE THE INSTALLATION
- 17 WARRANTY REGISTRATION
- 18 WARRANTY
14221-1510-4440, Rev. B
13
4 UNPACKING AND CHECKING THE EQUIPMENT
4.1 MATERIALS
A typical set of materials for an XG-25M mobile radio installation includes:
• XG-25M Mobile Radio — See Table 4-1 below for catalog and part number.
• Installation Kit DM-ZN9X — See Table 4-2 below for kit contents.
• Optional:
CH-25 Remote-Control Conversion Kit DM-ZN9Z — See Table 4-3 on page 14.
• One or Two Antennas — See Table 4-4. (A second antenna or a “combination” antenna is required if
the optional GPS receiver is installed and used.)
• Microphone — See Table 4-4 for microphone part numbers.
Table 4-1: XG-25M Mobile Radio Catalog and Part Number
CATALOG
NUMBER*
RADIO
PART NUMBER
DESCRIPTION
DM-MV1B 14015-0010-01 XG-25M VHF (136 to 174 MHz) 50-Watt Radio w/ CH-25 Control Head
DM-MU1B 14015-0030-01 XG-25M UHF (378 to 470 MHz) 50-Watt Radio w/ CH-25 Control Head
DM-M78B 14015-0020-01 XG-25M Dual-Band 700/800 MHz 35-Watt Radio w/ CH-25 Control Head
* In addition to the radio and control head, each catalog package also contains a Product Safety Manual and a
Quick Guide.
Table 4-2: Installation Kit DM-ZN9X
ITEM QTY. PART NUMBER DESCRIPTION ILLUSTRATION
1 1
14015-0201-01 Kit, Mounting Bracket
2 1
CA-012365-001 Cable, DC Power. Includes 10-AWG,
20-Foot DC Power Cable with straight
connector, (2) waterproof HFB fuse
holders, (1) 20-amp AGC fuse, (1)
15-amp AGC fuse, and (1) 3-amp AGC
fuse
3 1
FM-104859-004 Cover, Waterproof
Do not use the 20-amp fuse included with DC Power Cable CA-012365-001. The
radio’s main power must be protected with the 15-amp fuse included with the cable.
Refer to Section 14 for additional information.
CAUTION