Install Manual

41
Write Scan Keypad File Enable (Scan control unit)
Personality name <USERPERS> User’s personality file
Radio Code OGXXXXX Latest radio code file
(G13 or later vintage)
ADI Code <SAME>
Radio Unit ID <SAME>
Keypad File <CUBMAP> Keypad definition for
Control Unit B
CU ID (CU B) Must be Control Unit B
2. Now configure the Remote Mount Radio and the Auxiliary Control Unit
together with ProGrammer, as shown in Figure 23, Step 2. Program this
configuration with the following files:
Network Options
Dual Control Enable
Audio Mode Active
Switching Mode Independent
Siren Light Controller Unit A
Siren Light Connection Unit A
Speaker Disable
Multiple Radio Disable
Program Radio Setup
Mobile Options Push Button
M7100
IP
Options
Write System Keypad File Enable (System control unit)
Write Scan Keypad File Enable (Scan control unit)
Personality Name <USERPERS> User’s personality file
Radio Code <SAME>
ADI Code <SAME>
Radio ID <SAME>
Keypad File <CUAMAP> Keypad definition for
Control Unit A
CU ID (CU A) Must be Control Unit A