SDS
SDS – Coco Coir Page 2
SECTION 4. FIRST AID MEASURES
EYES: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the
first 5 minutes, then continue rinsing eye. If irritation persists, seek medical attention.
SKIN: No anticipated need for first aid measures. Rinse skin with water. If irritation persists, seek medical attention.
INHALATION: Remove affected person to fresh air. If irritation persists, seek medical attention.
INGESTION: Give water to drink. Seek medical attention.
SECTION 5. FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA: Use any means suitable for extinguishing surrounding fire.
SPECIFIC HAZARDS: Accumulation of dusts may be a combustibility hazard. Product may smolder, producing large amount
of smoke.
SPECIAL PROTECTIVE EQUIPMENT: Safety glasses, gloves
SECTION 6. ACCIDENTAL RELEASE MEASURES
Vacuum, shovel or sweep up and place into a suitable container for reclamation or disposal. Use care to avoid generating
dusts. Keep out of sewer or stormwater drains.
SECTION 7. HANDLING AND STORAGE
HANDLING: Use this product only in a manner consistent with its labeling. Avoid generation and/or breathing dusts.
STORAGE: Store indoor or outdoor in a dry place inaccessible to children and pets.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Wear gloves and eye protection as needed to prevent skin and eye contact. Wash skin to remove any dusts after use.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Solid
Appearance and Odor: Brown-tan, Fibers/ground fibers; mild earthy
pH: 5.5-7.5
Freezing Point: N/A
Boiling Point: N/A
Flash Point: N/A
Flammability: N/A
Upper/Lower Explosive limits: N/A
Vapor Pressure: N/A
Vapor Density (20°C): N/A
Specific Gravity (Water=1): N/A
Solubility: Insoluble in water
SECTION 10. STABILITY AND REACTIVITY
Chemical Stability: Stable.
Conditions to Avoid: Avoid dust generation.
Hazardous Decomposition Products: Under normal conditions of storage and use, hazardous decomposition products
should not be produced.
Incompatible Materials: N/A