SDS

SDS – Resistant Bed Bug Powder Page 3
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
EXPOSURE GUIDELINES
EXPOSURE LIMITS
OSHA PEL
ACGIH TLV
Supplier OEL
Chemical Name
ppm
mg/m3
ppm
mg/m3
ppm
mg/m3
Silica, Amorphous – precipitated silica and silica gel
(Contains no detectable crystalline silica)
6 8h
TWA
ENGINEERING CONTROLS: Adequate ventilation if dust is present. Handle in accordance with good industrial hygiene
and safety practices.
Eye Protection: Recommended: Safety glasses or goggles.
Skin Protection: Recommended: Wear protective (plastic or rubber) gloves and protective clothing.
Respiratory Protection: No special protection required.
When using do not eat, drink or smoke. Regular cleaning of equipment, work area and clothing is recommended.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Powder
Appearance and Odor: White free flowing, mild odor
pH: 5.0-6.5
Freezing Point: N/A
Boiling Point: >2000°C
Flash Point: N/A
Evaporation Rate (water=
1): N/A
Flammability: Not Flammable
Upper/Lower Explosive limits: N/A
Vapor Pressure: N/A
Vapor Density (air=1) (20°C): N/A
Specific Gravity (Water=1): N/A
Solubility: partially miscible in water/alcohol
SECTION 10. STABILITY AND REACTIVITY
Chemical Stability: Stable.
Conditions to Avoid: Avoid dust generation. Avoid exposure to moisture.
Hazardous Decomposition Products: Under normal conditions of storage and use, hazardous decomposition products
should not be produced.
Incompatible Materials: Acids, Alkalis