SDS

SDS – Egg Kill & Resistant Bed Bug Spray Page 3
SECTION 6. ACCIDENTAL RELEASE MEASURES
Remove all sources of ignition. Evacuate personnel to safe areas. Ensure adequate ventilation, especially in confined
areas. Use personal protective equipment as required. Prevent product from entering drains.
SECTION 7. HANDLING AND STORAGE
HANDLING: Use this product only in a manner consistent with its labeling. Ensure adequate ventilation, especially in
confined areas. Keep away from heat, sparks, flame and other sources of ignition. Take precautionary measures against
static discharges. Use spark-proof tools and explosion proof equipment. All equipment used when handling the product
must be grounded. Use with local exhaust ventilation. Use personal protective equipment as required. Avoid contact with
eyes. Avoid breathing vapors or mists. Contents under pressure. Do not puncture or incinerate cans. Do not stick pin or
any other sharp object into opening on top of can.
STORAGE: Keep container closed in a dry and cool place. Keep in properly labeled containers.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
EXPOSURE GUIDELINES
EXPOSURE LIMITS
OSHA PEL
ACGIH TLV
Supplier OEL
Chemical Name
ppm
mg/m3
ppm
mg/m3
ppm
mg/m3
Tetrahydrofurfuryl alcohol
0.5ppm
TWA
(8 hrs)
Isobutane
STEL:
1000ppm
ENGINEERING CONTROLS: Safety showers. Eyewash Stations. Ventilation Systems.
Eye Protection: Safety goggles. Face protection shield.
Skin Protection: Wear protective gloves and protective clothing.
Respiratory Protection: If exposure limits are exceeded or irritation is experienced, NIOSH/MSHA approved respiratory
protection should be worn. Positive-pressure supplied air respirators may be required for high borne contaminant
concentrations. Respiratory protections must be provided in accordance with current local regulations.
When using do not eat, drink or smoke. Regular cleaning of equipment, work area and clothing is recommended.