User Manual
Table Of Contents
- INTRODUCTION
- BASIC SETUP
- BASIC OPERATIONS
- XG-100P Controls
- Top Display
- Main Display
- Menu Navigation
- Before First Time Use
- Power On and Set Volume
- Select Channel Bank
- Select Channel Using Knob
- Turn Encryption On or Off
- Select Zone Using Menus
- Make an Individual Call
- Make a Priority Call
- Select a New Talkgroup
- Use Talkaround to Bypass Repeater
- Start Scan
- Stop Scan
- Nuisance Delete
- View GPS Information
- Emergency Operation
- ADVANCED OPERATIONS
- PROGRAMMING
- REFERENCE
- GLOSSARY
- INDEX
50
XG-100
ADVANCED OPERATI ONS
4
LOAD KEYGROUPS
Make sure that valid keygroups have been created and stored in the KVL 3000
Plus before proceeding.
1. Power on KVL 3000 Plus.
2. Connect KVL 3000 Plus to
side connector using a
12082-0400-A1 cable.
3. Use to highlight and
select:
• AES KEYS
• DES KEYS
SIDE
CONNECTOR