User Manual

14221-1200-4000, Rev. A
54
Figure 8-2: Wiring Diagram for a Remote-Mount Radio Installation
CH-721 SCAN MODEL
CONTROL HEAD
CU23218-0002
(MAMW-NCP9E)
CH-721 SYSTEM MODEL
CONTROL HEAD
CU23218-0004
(MAMW-NCP9F)
DTMF
MICROPHONE
MC-103334-040 OR
MC-103334-041
(INCLUDED WITH
MAMW-NMC9C)
STANDARD
MICROPHONE
MC-101616-040 OR
MC-101616-041
(INCLUDED WITH
MAMW-NMC7Z)
OR
NOISE-CANCELING
MICROPHONE
MC-103334-050 OR
MC-103334-051
(INCLUDED WITH
MAMW-NMC9D)
CH-721 MOUNTING
BRACKET KIT
KT-008608
[SUPPLIED WITH
INSTALLATION KIT]
• IF IGNITION SENSE ON/OFF FUNCTIONALITY IS REQUIRED,
CONNECT WHITE WIRE OF CONTROL HEAD’S DC POWER CABLE
TO A SWITCHED
13 VDC POWER SOURCE USING THE SUPPLIED
FUSE AND FUSE HOLDER.
• IF IGNITION SENSE ON/OFF FUNCTIONALITY IS NOT
REQUIRED,
CONNECT WHITE WIRE OF CONTROL HEAD’S DC POWER CABLE
TO AN UNSWITCHED
13 VDC POWER SOURCE USING THE
SUPPLIED FUSE AND FUSE HOLDER.
REAR VIEW OF CH-721
CONTROL HEAD
NEG POS
3-AMP FUSE &
FUSE HOLDER
(HFB TYPE)
RED
RED RED
5-AMP
FUSE
& FUSE
HOLDER
(HFB TYPE)
3-AMP FUSE &
FUSE HOLDER
(HFB TYPE)
20-AMP
FUSE &
FUSE
HOLDER
(HFB
TYPE)
RED
WHITE
RED
RING
TERMINALS
VEHICLE
DC POWER
DISTRI-
BUTION
BLOCK
(E.G.,
“POWER
ACCESS
POINT”)
VEHICLE BATTERY
+-
NOTE: BATTERY GROUND (-)
CONNECTION NOT INDICATED.
CAN
TERMINATOR
CD-014027-001
[SUPPLIED
WITH
INSTALLATION
KIT]
RED
WHITE
BLACK
(SHORT AS POSSIBLE)
RING TERMINAL
(CONNECT TO VEHICLE
CHASSIS GROUND)
CAN CABLE CA-009562-030 (30 FEET LONG) [SUPPLIED WITH INSTALLATION KIT]
SPEAKER CABLE
MAMROS0034-NN006
[SUPPLIED WITH
INSTALLATION KIT]
EXTERNAL SPEAKER
LS102824V10
[SUPPLIED WITH
INSTALLATION KIT]
WHITE WIRE OF RADIO’S DC
POWER CABLE (LABELED
AND COILED NEAR
VEHICLE’S FUSE BOX)
DC POWER CABLE CA-012616-001
(SUPPLIED WITH INSTALLATION KIT)
VEHICLE FUSE
BOX, ETC.
WHITE
REAR VIEW OF CH-100
CONTROL HEAD
CH-100
REMOTE-MOUNT
CONTROL HEAD
12099-1200-01
(XMCP9R)
CH-100 MOUNTING
BRACKET KIT
12099-1500-01
[SUPPLIED WITH
INSTALLATION KIT]