User Manual
Table Of Contents
- 1 REGULATORY AND SAFETY INFORMATION
- 1.1 SAFETY SYMBOL CONVENTIONS
- 1.2 RF ENERGY EXPOSURE AWARENESS AND CONTROL INFORMATION FOR FCC OCCUPATIONAL USE REQUIREMENTS
- 1.3 COMPLIANCE WITH RF EXPOSURE STANDARDS
- 1.4 REGULATORY APPROVALS
- OCCUPATIONAL SAFETY GUIDELINES AND SAFETY TRAINING INFORMATION
- 1.6 COMMON HAZARDS
- 1.7 SAFE DRIVING RECOMMENDATIONS
- 1.8 OPERATING RULES AND REGULATIONS
- 1.9 OPERATING TIPS
- 2 SPECIFICATIONS
- 3 INTRODUCTION
- 4 UNPACKING AND CHECKING THE EQUIPMENT
- 5 PLANNING THE INSTALLATION
- 6 ANTENNA INSTALLATION
- 6.1 ANTENNA MOUNTING LOCATIONS
- 6.2 ANTENNA INSTALLATION PROCEDURES
- 7 FRONT-MOUNT RADIO INSTALLATION
- 8 REMOTE-MOUNT RADIO INSTALLATION
- 8.1 MOUNTING THE REMOTE-MOUNT RADIO
- 8.2 REMOTE-MOUNT RADIO’S DC POWER INSTALLATION
- 8.3 CONTROL HEAD INSTALLATION
- 8.3.1 General Information on the CH100 Control Head
- 8.3.2 General Information on the CH721 Control Head
- 8.3.3 Multi-Head Radio Installations
- 8.3.4 Control Head Mechanical Installation
- 8.3.5 Control Head-to-Radio CAN Cable Connections
- 8.3.6 Control Head Power Cable Installation
- 8.3.7 Using Vehicle Fuse and TTap Kit (Optional) Instead of Waterproof Inline Fuse Holder (Standard)
- 9 SPEAKER INSTALLATION
- 10 MICROPHONE ATTACHMENT
- 11 OPTIONAL CABLES AND CONNECTIONS
- 12 GPS NMEA-FORMATTED DATA CONNECTION
- 13 INITIAL POWER-UP TEST
- 14 PERFORMANCE TESTS
- 15 COMPLETE THE INSTALLATION
- 16 WARRANTY REGISTRATION
- 17 WARRANTY
14221-1200-4000, Rev. A
25
Table 4-4: Installation Kit XMZN9A
for Remote-Mount Unity XG-100M Mobile Radio with CH-100 Control Head
ITEM QTY.
PART
NUMBER
DESCRIPTION ILLUSTRATION
1
1
KT23117
Kit, Remote-Mount Mobile Radio
Mounting Bracket. Includes
Mounting
Bracket FM103111V1
and M5 stainless-
steel hardware
to attach radio to bracket. For
installation-
related information,
see Section 8.1 on page 49.
2
1
12099-1500-01
Kit, CH-
100 Swivel Mounting
Bracket. Includes (1) U-Shaped
Swivel-
Mount Bracket and (2)
Thumbscrews. For installation-
related information, see Section
8.3.4 on page 59.
3
1
CA-012365-001
Cable, DC Power. Includes
10-AWG, 20-
Foot DC Power
Cable with straight connector, (2)
waterproof HFB fuse holders, (1)
20-amp AGC fuse, (1) 15-amp
AGC fuse and (1) 3-
amp AGC
fuse. See the CAUTION that
follows. For installation-related
information, see Section 8.2 on
page 51.
4
1
CA-012616-001
Cable, Control Head DC Power.
Includes 12-AWG, 10-
foot DC
Power Cable with straight
connector, (2) waterproof HFB
fuse holders, (1) 3-
amp AGC
fuse, and (1) 5-
amp AGC fuse.
For installation-related informa-
tion, see Section 8.3.6
on page
64.
5
2
CD-014027-
001
Terminator, CAN; 3-Pin, Straight
Body. For installation-related
information, see Section 8.3.5.2
on page 63.
(Table Continued on Next Page)