User Manual

14221-1200-4000, Rev. A
22
4 UNPACKING AND CHECKING THE EQUIPMENT
4.1 MATERIALS
A typical set of materials for a Unity XG-100M mobile radio installation includes:
• Unity XG-100M Mobile Radio
• CH-100 Control Head
or
• CH-721 Scan Control Head
or
• CH-721 System Control Head
• Installation Kit XMZN6W for Front-Mount Unity XG-100M — Contents listed in Table 4-3.
or
• Installation Kit XMZN9A for Remote-Mount Unity XG-100M and CH-100 — Contents listed in
Table 4-4.
or
• Installation Kit XMZN7R for Remote-Mount Unity XG-100M and CH-721 — Contents listed in
Table 4-5.
• One or Two Antennas — As listed in Table 4-7. (A second antenna is required for the GPS receiver if
a “combo” antenna is not used.)
• Microphone — See Table 4-8 for microphone part numbers.
Table 4-1: Unity XG-100M Mobile Radio and CH-100/CH-721 Control Head
Catalog and Part Numbers
CATALOG
NUMBER
PART NUMBER DESCRIPTION
XM-100F 12099-1000-01
Unity XG-100M Mobile Radio without Control Head
(for front or remote-mount radio applications)
XMCP9R 12099-1200-01
CH-100 Control Head, Remote-Control
(for use on a remote-mount radio)
XMCP9Q 12099-1200-02
CH-100 Control Head, Local-Control
(for use on a front-mount radio)
XMCP9E CU23218-0002
CH-721 Scan Control Head, Remote-Control
(for use with a remote-mount radio)
XMCP9F CU23218-0004
CH-721 System Control Head, Remote-Control
(for use with a remote-mount radio)
XMCP9G CU23218-0001
CH-721 Scan Control Head, Local-Control
(for use on a front-mount radio)
XMCP9H CU23218-0003
CH-721 System Control Head, Remote-Control
(for use on a front-mount radio)