User Manual

14221-1200-2010
35
7. Using ◄or ►, select:
• DES-OFB key
• AES-256 key
8. Press LOAD.
9. Verify that the KVL 3000 Plus screen displays LOADED SUCCESSFULLY OK.
10. Select OK on the KVL 3000 Plus.
11. Repeat for additional keys.
12. Remove the KVL 3000 Plus cable from the radio.
7.3 LOAD KEYGROUPS
Make sure that valid keygroups have been created and stored in the KVL 3000 Plus before proceeding.
1. Power on KVL 3000 Plus.
2. Connect KVL 3000 Plus to XG-100M connector using cable 12099-0410-A1.
NOTE
Once the KVL 3000 Plus is connected, a keyset is established whether the keys are
loaded or not. You will need to zeroize to bring the XG-100M to a fully zeroized state
(Section 7.4).
3. At the radio, select MAIN MENU  SECURITY  OTHER KEYFILL. The KEYFILL
SCREEN is displayed. The radio can now accept keys from the KVL.
At the KVL 3000 Plus:
4. Select TARGET.
5. Select LOAD.
6. Select GROUP.
7. Using ◄or ►, select:
• DES-OFB keygroups
• AES-256 keygroups
8. Press LOAD.
9. Verify that the KVL 3000 Plus screen displays LOADED SUCCESSFULLY OK.
10. Select OK on the KVL 3000 Plus.
11. Repeat for additional groups.
12. Remove the KVL 3000 Plus cable from the radio.