User's Manual

14221-1200-4010, Rev. B

XG-100LPA

XG-100M

Figure 7-5: Assembly into Separate Brackets (Exploded Views)

4. Secure the LBPA to the bracket using six (6) M5 Philips-head screws (SC-018424), three (3) per side.

These screws have a captive-type (SEMS) lock washer. Tighten all six (6) screws with a screwdriver

until the lock washer on each screw is fully compressed, and the LBPA is firm and flush between the

bracket sides.

5. Check the mounting area for proper clearance for cable service looping and for air circulation, plus an

area to secure and stow the excess cable lengths.

Proper mounting is one factor that ensures optimal radio performance. An improperly

mounted radio may experience degradation in the quality of voice and data

communications.

NOTE

MRU Radio

(XG-100M)

Low Band PA

(XG-100LPA)

Screw, M5 x 10mm

(Screw, flat washer, and

lock washer) 6x

Screw, M5 x 10mm

(SC-018424) 6x

Base Bracket

(FM103111V1)

Base Bracket

(1000003678)