User's Manual

14221-1200-4010, Rev. B

1.3.3 Contact Information

For additional information on RF exposure and other information, contact Harris using one of the contact

links listed in Section 4 on page 21.

1.4 RADIO FREQUENCY INTERFERENCE

1.4.1 FCC Part 15

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired

operation.

1.4.2 Industry Canada

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the

following two conditions: (1) this device may not cause interference, and (2) this device must accept any

interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de

licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de

brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d'en compromettre le fonctionnement.

1.5 OCCUPATIONAL SAFETY GUIDELINES AND SAFETY TRAINING

INFORMATION

To ensure bodily exposure to RF electromagnetic energy is within the FCC allowable limits for

occupational use. Always adhere to the following basic guidelines:

 The push-to-talk button should only be depressed when intending to send a voice message.

 The radio should only be used for necessary work-related communications.

 The radio should only be used by authorized and trained personnel. It should never be operated by

children.

 Do not attempt any unauthorized modification to the radio. Changes or modifications to the radio may

cause harmful interference and/or cause it to exceed FCC RF exposure limits. Only qualified

personnel should service the radio.

 Always use only Harris-authorized accessories (antennas, control heads, speakers/mics, etc.). Use of

unauthorized accessories can cause the FCC RF exposure compliance requirements to be exceeded.

The information listed above provides the user with information needed to make him or her aware of a RF

exposure, and what to do to assure that this radio operates within the FCC exposure limits of this radio.