User's Manual

Document Number/Ref.-No. Issue
00-6383A01 1.0
(113491 2)
Page 21 of 26
Copyright  2000 by Harris Corporation, RF Communications Division
All rights reserved. No part of this publication may be reproduced or transmitted in
any form or by any means, electronic or mechanical, including photocopy, recording, or any information storage and retrieval system, without permission in
writing by
Harris Corporation, RF Communications Division,
Rochester, New York, USA
tme [t/r] 0/1
Time Mark Enable control.
Not selecting t or r enables/disables time marks for both the receiver and the transmitter.
[t] Enable/Disable transmitter time mark
[r] Enable/Disable receiver time mark
0 Disables time mark
1 Enables time mark
--------------------
tmp [0] t/r
Time Mark Period control.
t Menu for adjusting the time mark period of the transmitter is displayed
r Menu for adjusting the time mark period of the receiver is displayed
[0] Selects "perfect" time mark period setting for both the transmitter and the receiver
t 0 Sets "perfect" time mark period for the transmitter
r 0 Sets "perfect" time mark period for the receiver
--------------------
tmo [0]
Receiver Time Mark Offset
With no arguments, displays a menu which allows the user to change the time mark offset for the Receiver.
[0] Sets the receiver time mark offset back to zero (i.e. perfect synchronization with the transmitter time mark signal)
--------------------
cls
This command causes the application to clear the screen.
--------------------