Owner's manual

Appendix B: CE Declaration of Conformity
We, Harrington Hoists, Inc.,
401 West End Ave.,
Manheim, PA 17545, USA
declare under our sole responsibility that the products:
Electric chain hoist TNER
for use with or without the relevant serial trolleys in capacity range of 1/2 ton up to 2 ton,
to which this declaration relates is in conformity with the following EC directives and standards.
EC directives:
Machinery Directive 2006/42/EC
EMC Directive 2004/108/EC
Low Voltage Directive 2006/95/EC
Harmonized standards:
EN ISO 12100: 2010 Risk assessment and risk reduction
EN 14492-2: 2006 Power driven hoists
EN 818-7: 2002+A1: 2008 Short link chain for lifting purposes
EN ISO 13850: 2006 Emergency stop
EN 60204-1: 2006 Electrical equipment of machines
EN 60204-32: 2008 Electrical equipment of machines
EN 61000-6-4: 2007 Electromagnetic compatibility - Emission
EN 61000-6-2: 2005 Electromagnetic compatibility - Immunity
National standards:
FEM 9.511: 1986 Classification of mechanisms
FEM 9.683: 1995 Section of lifting and travel motors
BGV-D8: 1980 Winch, Hoist and pulling device
VPLT.SR2.0: 2005 Codes of practice for event technology
EC DECLARATION OF CONFORMITY
54