Owner's manual

3.2.7

Verify that the load chain is not twisted or tangled prior to operating the hoist.
Make sure the chain hook on 2 Ton double fall models is not capsized. See Figures 3-3 and 3-4.
Correct all chain irregularities before conducting the first hoist operation.
Figure 3-3
Twist in Load Chain – 2 Ton Double Fall Models
Figure 3-4 Capsized Hook and Chain –Double Fall Models
3.3 Mounting Location
3.3.1

Prior to mounting the hoist ensure that the suspension and the supporting
structure are adequate to support the hoist and its loads. If necessary consult a professional that is
qualified to evaluate the adequacy of the suspension location and its supporting structure.
3.3.2

See Section 6.6 for outdoor installation considerations.
12