Instruction Manual

21
3.12.4

For Models TCR-250P&C, 500P&C, 1000P2&C2, 1000P&C and 2000P2&C2
verify the limit locks are properly installed on the load chain. For reference see Figure 3-8 for hoist
versions 1, A, B and C and Section 7.3.2. For Models TCR-3000P&C and 6000P2&C2 verify that the
chain/limit lever is operational and can move freely in both the up and down directions. For reference
see Figure 3-9.
Versions 1, A and B Version C Only
Figure 3-8 Limit Switch Components
Figure 3-9 Limit Switch Components
3.12.5 Measure and record the “K” dimension of all hooks on hoist. See Table 5-6 under Section 5,
“Inspection”. Always use the same side of the hook to measure and record the "K" dimension.
3.12.6 Record the hoist Code Number and Serial Number (from the nameplate on the hoist – see Section 10)
in the space provided on the cover of this manual.