Owner manual

16
6.0 Maintenance and Handling
6.2 Lubrication
6.2.1 Load Chain
§ Refer to 6.2.1 of the EROM.
6.2.2 Hooks and Suspension Components:
§ Refer to 6.2.2 of the EROM.
6.2.3 Gear Box:
§ Refer to 6.2.3 of the EROM except use the following table for checking oil level.
Table 6-3 Criteria for Checking Hoist Gear Oil Level
Oil Level (Hoist at level position)
Capacity Code
Min Max
080S, 100L, 100S, 0150S,
200S
1“ below bottom
edge of check hole
Even with bottom
edge of check hole.
6.3 Motor Brake - Use the table below in conjunction with Section 6.3 of the EROM. This table replaces
Table 6-3 of the EROM.
Table 6-3 Motor Brake Gap
Capacity Code
Brake Gap (G)
inch (mm)
080S, 100L, 100S, 150S, 200S
0.032 (0.8)
6.4 Load Chain
6.4.1 Lubrication and Cleaning – refer to Section 6.2 of EROM.
6.4.2 Load Chain Replacement for ER080S and ER100L: