BK961EL - Twin over Full Bunk Bed with Twin Trundle - Assembly Instructions

BEDDING SPECIFICATION
for a foundation or bunkie board.
BED MATTRESS SPECIFICATIONS
TWIN OVER TWIN
Upper Bunk: Only use a mattress that is 74" - 75" long and 37 1/2" - 38 1/2" wide on
the upper bunk.
- Ensure thickness of mattress and foundation combined does not exceed 9".
Lower Bunk: Only use a mattress that is 74" - 75" long and 37 1/2" - 38 1/2" wide on
the lower bunk.
TWIN OVER FULL
Upper Bunk: Only use a mattress that is 74" - 75" long and 37 1/2" - 38 1/2" wide on
the upper bunk.
- Ensure thickness of mattress and foundation combined does not exceed 9".
Lower Bunk: Only use a mattress that is 74" - 75" long and 52 1/2" - 53 1/2" wide on
the lower bunk.
REPLACEMENT PARTS
ASSEMBLY TIPS
- Power tools are not recommended for assembling your furniture.
- Give yourself plenty of room to work.
- Due to the size of this bunkbed, it must be assembled within the space it will occupy.
- The assembly will require at least two people to complete.
- Make sure all the fasteners are tight.
- Take your time and read the instructions carefully.
page 7 of 7
- Always use the recommended size mattress or mattress support or both, to help
prevent the likelihood of entrapment or falls.
- All our bunk beds are supplied with a complete slat kit, so there is no need
FULL OVER FULL
Upper Bunk: Only use a mattress that is 74" - 75" long and 52 1/2" - 53 1/2" wide on
the upper bunk.
- Ensure thickness of mattress and foundation combined does not exceed 9".
Lower Bunk: Only use a mattress that is 74" - 75" long and 52 1/2" - 53 1/2" wide on
the lower bunk.
- Replacement parts, including additional guardrails may be obtained by contacting us.
- Guard rails are not available for the lower bunk. This bunk bed is not designed or
certified to have guard rails installed on the lower bunk.