Installation & Assembly

Glue!
Unglue!
Smart
Easy to apply
Smudge
Free
Lovely
To apply, please follow the steps below:
1. Choose the application area.
Eg.: living room, bedroom, oce, kitchen, etc.
3. Clean the surface with a
damp cloth.
2. Lay modules on the oor to attain the desired
layout.
4. Remove the protective
lm from the back.
5. Position the piece on the desired surface and press
gently with your hands.
6. The adhesive allows you to glue and unglue up
to 5 times
! So, if you move, you can take it with you
without leaving any mess behind!
To remove:
Application Recommendations
# Adhesion performance is guaranteed 15 days
after receipt. Do not unpack if you do not wish to
apply immediately. If you already did, place some
weight over the pieces to prevent them to bend.
# Ideal for at and smooth surfaces.
# Not recommended for surfaces that are porous,
irregular, freshly painted or those that do not allow
good adhesion.
# If the wall has seepage, the glue and unglue will
not work and might damage the wall.
# Not recommended for places subject to humidity
and sun exposure.
# When removing the pieces from the wall, always
make sure you do not apply force on the most
fragile parts. See instruction number 7.
# We recommend the use of a vacuum cleaner,
duster and/or damp cloth.
# Do not use:
Sponge Chemical Steel
wool
Done?
How cool!
You have just purchased your decorative product!
Doubts? Contact us
Cleaning!
7. To unglue the pieces, we suggest to
use a nylon thread, to avoid damage
to the delicate parts. If the adhesive
does not yield, try using a blow dryer.
Tip: Keep the protective lm so you can preserve your
product without aecting the adhesive performance.