Installation & Assembly

STEP 2 STEP 3
06
Guide the drawer panel (06) in carefully so that it
won’t jump out of its grooves. Be sure it fits fully
into its groove at the bottom (in the drawer face)
before fitting the drawer back.
You will need to spread the drawer side apart a bit
to fit the dowels in the drawer back into their holes.
Do this gently, please! Remember the JCB in step1
must be a bit loose. After this, tighten all the JCB on
the drawer face.
05
A
A
A
A
D
STEP 4
B
B
Page 3 of 3
BED DRAWER
Carefully turn the assembled drawer down, onto its wheels. Using the JCB M6 X 2 ½”(A)
and barrel nuts (B), tighten with the Allen wrench (D).
Repeat steps 1 through 4 for second storage drawer.
A
B
D
JCB M6 X 2 ½”
Barrel Nut
Allen Wrench
Adult Assembly