TWIN/TWINBUNKBED ASSEMBLY INSTRUCTIONS PAGE 1 OF 9
ASSEMBLY INSTRUCTIONS ASSEMBLYTIME30MINUTES PARTS IDENTIFICATION PARTS IDENTIFICATION B1 (BOX 1) PART NAME A B LEFT UPPER BED END B2 (BOX2) FIGURE QTY 1PC RIGHT UPPER BED END 1PC LOWER BED END 2PCS PART NAME FIGURE QTY LF LEFT LADDER STILE 1PC MF RIGHT LADDER STILE 1PC NF LADDER STEP 4PCS B3 (BOX 3) C O ROLL SLAT (14PCS) 2SETS B2 (BOX 2) D FRONT UPPER SIDE RAIL HARDWARE IDENTIFICATION 1PC Z - B2 (BOX 2) - HARDWARE PACK IS LOCATED IN (B2) E BACK UPPER SIDE RAIL HARDWARE
ASSEMBLY INSTRUCTIONS UPPER BED END STEP 1 7 1.2 1.4 2 1 7 5 3 B J H I E K J A D 7 7 3 5 1 2 1.3 1.
ASSEMBLY INSTRUCTIONS STEP 2 4 O O LOWER BED END STEP 3 C 1 5 2 7 G F C PAGE 4 OF 9
ASSEMBLY INSTRUCTIONS STEP 4 O 4 O STEP 5 6 PAGE 5 OF 9
ASSEMBLY INSTRUCTIONS STEP 6 MF NF LF 3 8 3 STEP 7 7 3 PAGE 6 OF 9
ASSEMBLY INSTRUCTIONS STEP 8 COMPLETE PAGE 7 OF 9
SIZE OF MATTRESS The length and width of the bunk mattress are as follow: Upper bunk Length 74" - 75" Width 37 1/2"- 38 1/2" Thickness 6" Maximum Lower bunk 74" - 75" 37 1/2”-38 1/2” 6" Maximum Ensure thickness of mattress does not exceed 6” and there must be at least 5” from mattress sleeping surface to top edge of guardrail. SAFETY WARNING 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Follow the information on the warnings appearing on the upper bunk end structure and on the carton.
