Instructions / Assembly

ManualsBrandsHarper & Bright Designs ManualsFurnitureCanopy Car-Shaped Natural Twin Size Wood Platform Bed

ASSEMBLY INSTRUCTIONS

TWIN BED WITH WHEELS

1. PLACE ALL PARTS ON A CLEAN AND SMOOTH SURFACE SUCH AS A RUG OR CARPET TO

AVOID THE PARTS FROM BEING SCRATCHED

2. BEFORE YOU BEGIN, KINDLY FOLLOW THE ASSEMBLY INSTRUCTIONS STEP BY STEP

3. DO NOT TIGHTEN ALL SCREWS AND BOLTS UNTIL THE BED IS FULLY SET-UP

IMPORTANT NOTE

WF290139

Summary of content (11 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS TWIN BED WITH WHEELS IMPORTANT NOTE 1. 2. 3.
PAGE 2
! SAFETY WARNING ! 1 . This bed is designed for use only mattress(es) meeting the following specifications on the upper bunk , and lower bunk : Upper bunk (bunk bed and tribed included) Bed type Length Twin standard 74'' - 75'' Width 38 ½'' Thickness 6'' Max 2 . Replacement parts, including additional guardrails, maybe obtained from any of our (GIGACLOUD TECHNOLOGY(USA) INC. 18961 ARENTH A VENUE CITY OF INDUSTRY, CA, 91748) dealers 3 .
PAGE 3
Detail View C5 C7 B3 B2 C7 B4 C5 N3 A3 N1 N2 C2 C1 A2 N2 N1 Lx13 C6 B1 A4 N2 C4 N1 C6 C3 N2 A1 N1 Page 2
PAGE 4
Part list : WF290139 A1 A2 Leg (1 pc) B1 A3 Leg (1 pc) B2 Leg (1 pc) A4 Leg (1 pc) B3 Leg (1 pc) Leg (1 pc) B4 Leg (1 pc) Leg (1 pc) C1 C2 C3 C4 Headboard rails (1 pc) Headboard rails (1 pc) Headboard rails (1 pc) Headboard rails (1 pc) C5 N1 N2 N3 Headboard rails (2 pcs) Connecting rod (4 pcs) Wooden wheels (4 pcs) Page 3 Wooden wheels (2 pcs)
PAGE 5
Part list : WF290139 C6 C7 Guardrail (2 pcs) Rail (2 pcs) L Bed slats (13 pcs) Page 4
PAGE 6
Hardware list in : WF290139 1 2 M6 x 80 mm Hex head bolts (28)pcs 5 3 M6 x 50 mm Hex head bolts (8)pcs 6 Ø8 x 30 Wood dowel (16) pcs M6 x 30 mm Hex head bolts (12)pcs 7 M4 x 25 Wood screws (30) pcs Ø12 x 60 Wood dowel (4)pcs Assemble tools required (Not included) Page 5 4 M6 x 13 mm Horizontal-hole bolt (28)pcs 8 Allen key (1) pc
PAGE 7
Step1 N3 C2 N3 6 6 C1 M4 x 25 Wood screws 4 pcs 6 3 Step2 X2 3 C6 N1 3 3 M6 x 30 mm Hex head bolts 4 pcs N1 Step3 X2 N2 3 3 3 3 2 C6 2 N2 3 3 2 3 M6 x 50 mm Hex head bolts 8 pcs M6 x 30 mm Hex head bolts 8 pcs 2 2 2 2 Page 6
PAGE 8
Step4 A3 1 1 4 1 C2 4 5 5 4 N3 C1 A2 N3 4 1 4 5 4 4 1 5 1 1 4 5 1 5 4 1 1 1 A1 4 1 5 C4 4 1 5 5 5 4 4 A4 C3 4 4 1 4 5 5 5 1 1 M6 x 80 mm Hex head bolts 10 pcs M6 x 13 mm Horizontal-hole bolt 10 pcs Ø8 x 30 Wood dowel 8 pcs Page 7
PAGE 9
Step5 4 4 4 4 1 Note: Part 4 will face up with the "x" mark on it, otherwise it cannot be tightened 4 1 4 4 4 C6 4 4 C6 1 4 4 1 1 4 M6 x 80 mm Hex head bolts 8 pcs M6 x 13 mm Horizontal-hole bolt 8 pcs Step6 6 Lx13 6 M4 x 25 Wood screws 26 pcs 3-3/8'' Note: Do not lock the screws of the trundle slats to te outermost edge the trundle slats, you need to leave a certain space at the edges, otherwise it will cause the board to break Page 8
PAGE 10
5 4 5 4 Step7 1 5 4 Note: Part 4 will face up with the "x" mark on it, otherwise it cannot be tightened C5 5 4 B2 1 1 5 4 5 4 1 C5 4 B3 5 1 B4 B1 1 4 5 M6 x 80 mm Hex head bolts 4 pcs M6 x 13 mm Horizontal-hole bolt 4 pcs Ø8 x 30 Wood dowel 4 pcs Step8 1 5 5 4 5 4 4 Note: Part 4 will face up with the "x" mark on it, otherwise it cannot be tightened 5 1 4 C7 5 4 C7 1 4 5 1 Page 9 1 4 5 M6 x 80 mm Hex head bolts 4 pcs M6 x 13 mm Horizontal-hole bolt 4 pcs Ø8 x
PAGE 11
Step9 7 7 Ø12 x 60 Wood dowel 4 pcs Step10 4 4 Note: Part 4 will face up with the "x" mark on it, otherwise it cannot be tightened 1 4 4 4 1 M6 x 13 mm Horizontal-hole bolt 2 pcs 1 1 4 M6 x 80 mm Hex head bolts 2 pcs Page 10