Instructions / Assembly

Operation Instructions of Controller
Ⅰ.Specifications:
Working temperature：-20-60 ℃ Supply voltage: DC12V
Product size:L62xW35xH23mm Package size:L95xW68xH45mm
Net weight:42g Gross weight:57g
Output:Three CMOS drain- open output Connecting Mode：Common anode
Max load current：2 A each color
Ⅱ.Control Method:
Adopt RF remoter to control the led controller, which has 24 buttons,the function of
each button as the table below:
Brightness +(Speed up)
Brightness - (Speed down)
Off
On
Static red
Static green
Static blue
Static white
Static orange
Static dark yellow
Static yellow
Static straw yellow
Static pea green
Static cyan
Static light blue
Static sky blue
Static dark blue
Static brown
Static pink
Static purple
7 color jumpy change
All fade out&fade in
7 color fade change
3 base color jumpy
+
+
G
B
R
R
B
G
OUTPUT
POWER
DC12V
+
-
Ⅳ.Warning:
1.Supply voltage of this product is DC12V never connect to DC24V or AC220V.
2.Never connect two wires directly in case of short circuit.
3.Lead wire should be connected correctly according to colors that connecting
diagram offers.
4.Warranty of this product is one year, in this period we guarantee replacement or
repairing with no charge,but exclude the artificial situation of damaged or overload
working.
LED light
If you can't let the lights work successfully,please check the
following:
1.Please check the direction of the connect,try it in the opposite
direction,according to the following picture.
2.Please check the remote control,it need you to tear down the
plastic septum before use it.
3.If one of the colors is not bright, please check whether the four
wires in the plug are skewed, and move the main line to make the
four wires flush.
1. Please check the direction of the arrow
2. Please pull the plastic block out of the remote
control
3. Please check whether the four wires of the plug
are neat
Plastic
RIGHT!
WRONG!
①
②
③
Ensure that the
four wires are
flush
THIS PRODUCT CONTAINS A BUTTON BATTERY
If swallowed, a lithium button battery can cause severe or
fatal injuries within 2 hours.
Keep batteries out of reach of children.
If you think batteries may have been swallowed or placed
inside any part of the body, seek immediate medical attention.
WARNING
！
Page 10 of 10
Unplug the battery separator of the
remote control before use
Ⅲ.Panel specification and connecting drawing as follows: