Instructions / Assembly

Step 7
With the assistance of your partner,lift the rope on the two sides of Seat(D) by hand.
Put the Seat(D) on the wood bar of the Front Rail(E) and then slowly place it down as shown above.
Note:All the u-shaped iron sheet need clamped to the bolt.
Step 8
Tilt and lay the Chair onto a flat surface.
Tighten the Bolts in the bottom of Backrest(A),Left Armrest(B) and Right Armrest(C) by Allen
Wrench(
②
) as pictured above.
Tighten the Bolts fully in a sequential manner.
Seat(D)
Left Armrest(B)
Right Armrest(C)
Backrest(A)
Front Rail(E)
PAGE 7 OF 9