Use and Care Manual

Step 4
Slide the Tapered Connectors on the Backrest(A) into the Tapered Connectors on the Left Armrest(B)
as shown in the picture.
Repeat the same process with the Right Armrest(C).
Note: Make sure the Tapered Connectors on Backrest(A) lock into the Tapered Connectors on
the Left Armrest(B) and Right Armrest(C).
Assistance from an adult partner is necessary for this assembly process.
During this assembly process - do exercise caution. You may need to use your hand to press
down and or pave away the padded surface to facilitate the 'slip and slide' assembly.
Caution: Ensure that your fingers do not get caught or pinched in the assembly process.
Step 5
With the assistance of your partner,lift the rope on the two sides of Seat(D) by hand.
Put the Seat(D) on the wood bar of the Front Rail(E) and then slowly place it down as shown above.
Note:All the u-shaped iron sheet need clamped to the bolt.
Backrest(A) Left Armrest(B)
Seat(D)
Front Rail(E)
Keep the Backrest(A) and
the back of the Left
Armrest(B), Right
Armrest(C) flat.
Right Armrest(C)
第 6 页，共 8 页