Assembly Instructions Note: Please help to read my instruction before you ready to assemble.
Part List Label Picture Description QTY (PCS) A Backrest 1 B Left Armrest 1 C Right Armrest 1 D Seat 1 E Front Rail 1 F Seat Cushion 3 G Leg 4 第 2 页，共 8 页
Hardware ① Plastic Washer 7 ② Allen Wrench 1 Assembly Preparation All Including: x3 x4 x1 x7 NOTICE: -Please read the instruction from cover to cover in detail.Thanks. -Installed by at least two adults -To avoid damaging your furniture ，Please don't assemble on flooring or carpet. -Please assemble on a clean non-marring surface, example for packing foam. -Saving all packaging until have finished.
Assembly Steps OVERVIEW Left Armrest(B) Seat Cushion(F) Backrest(A) Right Armrest(C) Front Rail(E) Leg(G) This Sofa has multiple parts and may require up to 60 minutes to assemble. To give you an overview of the Sofa parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 2 Right Armrest(C) Front Rail(E) Left Armrest(B) With the assistance of your partner,slide the hook in the eng of Front Rail(E) into the bolts on the Left Armrest(B) and Right Armrest(C), as shown in Picture. Step 3 Backrest(A) Loosen the bolt in Backrest(A) around half inch by Allen Wrench( ②).
Step 4 Right Armrest(C) Backrest(A) Left Armrest(B) Keep the Backrest(A) and the back of the Left Armrest(B), Right Armrest(C) flat. Slide the Tapered Connectors on the Backrest(A) into the Tapered Connectors on the Left Armrest(B) as shown in the picture. Repeat the same process with the Right Armrest(C). Note: Make sure the Tapered Connectors on Backrest(A) lock into the Tapered Connectors on the Left Armrest(B) and Right Armrest(C).
Step 6 Right Armrest(C) Left Armrest(B) Backrest(A) Tilt and lay the Sofa onto a flat surface. Tighten the Bolts in the bottom of Backrest(A),Left Armrest(B) and Right Armrest(C) by Allen Wrench( ②) as pictured above. Tighten the Bolts fully in a sequential manner. Step 7 Right Armrest(C) Left Armrest(B) Front Rail(E) Change tilt and lay the Sofa another side onto a flat surface. Tighten all the Bolts at the end of bottom Left Armrest(B) and Right Armrest(C) by Allen Wrench( ②) as pictured above.
Step 8 Right Armrest(C) Left Armrest(B) Leg(G) Install the Leg(G) at the bottom of Left Armrest (B) and Right Armrest(C) by placing Plastic Washer( ①) on the threaded stem. Then insert threaded stem into the threaded mounting postion at the bottom of Left Armrest(B) and Right Armrest(C).Tighten by turning the Leg clockwise. Note: The use of Plastic Washer(①) are OPTIONAL and are especially useful to help alleviate slight wobbles. Some Legs may need more than one whilst some legs may not need any.
