7 6 x1 HA RD 5 x4 WA RE 4 x4
x4
This product has been designed for seating two (2) average adults. To prevent injury and damage to this unit, PROHIBIT jumping on it. This product is designed for home use and not intended for commercial use. Children under the age of 5, small infants and babies should not sleep alone on this product for safety reasons. Recommended # of people needed for handling: 2 (however it is always better to have an extra hand.) THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PARTS 1 2 Backrest QTY:1 Seat Body QTY:1 3 3 5 Leg QTY:4 Arm QTY:1 Pair ( In the storage underneath of seat body) 2/8
Step 1 : Carefully unpack parts/hardware from box and storage of seat body, place on a clean flat surface. 1 2 HARDWARE 3 6 x1 5 x4 4 x4 Storage, underneath of seat body.
Step 2 : Place both arms as shown below, secure two legs into pre-drilled holes on the bottom of arms. Please avoid overtightening.
Step 3 : Carefully lift and turn assembled arms onto its legs.Insert seat body metal plates to both arms as shown below. Ensure it is correctly in place.
Step 4 : Insert backrest with ear piece metal plates to both arms as shown below. Ensuring is correctly in place.
Step 5: Insert backrest metal plates to both arms as shown below.Ensuring it is correctly in place.
Setp 6 : Finally, stretch and pull down rear cover evenly before securing velcro strip to seat base. Repeat if necessa for better fit.
This product has been designed for seating three (3) average adults. To prevent injury and damage to this unit, PROHIBIT jumping on it. This product is designed for home use and not intended for commercial use. Children under the age of 5, small infants and babies should not sleep alone on this product for safety reasons. Recommended # of people needed for handling: 2 (however it is always better to have an extra hand.) THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PARTS 1 2 Backrest QTY:1 ( In the storage underneath of seat body) Seat Body QTY:1 3 3 3 5 Arm QTY:1 Pair ( In the storage underneath of seat body) Leg QTY:4 2/8
Step 1 : Carefully unpack parts/hardware from box and storage of seat body, place on a clean flat surface. 1 7 HARDWARE 6 x1 5 x4 4 x4 Storage, underneath of seat body.
Step 2 : Place both arms as shown below, secure two legs into pre-drilled holes on the bottom of arms. Please avoid overtightening.
Step 3 : Carefully lift and turn assembled arms onto its legs.Insert seat body metal plates to both arms as shown below. Ensure it is correctly in place.
Step 4 : Insert backrest with ear piece metal plates to both arms as shown below. Ensuring is correctly in place.
Step 5: Insert backrest metal plates to both arms as shown below.Ensuring it is correctly in place.
Setp 6 : Finally, stretch and pull down rear cover evenly before securing velcro strip to seat base. Repeat if necessary for better fit.
