User's Manual

Guitar Controller FAQ
for Xbox 360
R
Problem: My Guitar Controller keeps disconnecting.
Solution 1: Ensure there are no 2.4 GHz wireless devices around that could potentially
interfere with The Beatles: Rock Band Controllers. Common offending devices include cordless
phones, Wi-Fi routers, and microwaves.
Solution 2: Make sure that the batteries are not jarring loose during play. A thin layer
of duct tape, cardboard, or weather stripping foam on the inside of the battery door
can help secure the batteries during insane solos.
Problem: The auto-calibration feature on my Guitar Controller isn’t working.
Solution 1: Please ensure you have fresh batteries in your Guitar Controller.
Solution 2: Calibration works best in a dark, silent room. If you have a surround sound
setup, please ensure you are holding the Guitar Controller up to your center speaker
during audio calibration, as the calibration tone will only be played by the center speaker.
Solution 3: Ensure that vibration is enabled on your profile:
1. Press the Xbox Guide button on the Guitar Controller that you are using to calibrate.
2. Select "Personal Settings."
3. Select "Vibration," then "Enable."
4. Attempt automatic calibration again.
Problem: My Guitar Controller doesn't always engage Beatlemania when I want it to.
Solution: As an alternative to tilting the guitar, you can engage Beatlemania with any Rock Band,
Rock Band 2 or The Beatles: Rock Band kick pedal. Just plug the pedal into the 3.5 mm jack on
the bottom of your guitar controller and depress the pedal. This will engage Beatlemania without
the need for you to tilt the guitar. Keep in mind that the pedal works in addition to the tilt
sensor in your Guitar Controller and does not disable it.