User Guide

HARMAN CBT 1000 and 1000E Quick Guide
Wiring Guide for 1x CBT 1000 speaker
Connect 1 amplifier channel to each CBT 1000 speaker
Recommended Amplifiers
Crown XTi6002 – 2100W @ 4 ohms
(One channel for each CBT 1000)
OR
Crown CDi6000 – 2100W @ 4 ohms
(One channel for each CBT 1000)
OR
Crown DCi2x2400N – 2400W @ 4 ohms
(One channel for each CBT 1000)
+
-
(NL4 or Binding
Post Outputs)
(Barrier Strip
Input)
(Barrier Strip
Outputs)
(Barrier Strip
Outputs)
Amplifier Selection Considerations
• How much power is needed (less powerful amplifiers can be used if you don’t
need all the SPL the speaker is capable of producing. However, pushing a lower-
power amplifier into clipping can damage the speaker).
• How much DSP and which DSP functions are required.
• Whether the amp needs to be networked (DCi-N).
• Project’s budget.
Recommended Amplifier
Crown DCi2x2400N – 2400W @ 4 ohms
(One channel for each CBT 1000)
+
-
(Barrier Strip
Input)
(Barrier Strip
Outputs)
Note:
• Important
– The CBT 1000E must be connected in
parallel with the CBT 1000 and the two of them MUST
be in proper polarity. “+” to “+” and “–” to “–”.
• Other system configurations are available. Please reach
out to your Harman sales rep for details. And exception
request may be required, depending on equipment
utilized.
Wiring Guide for 1x CBT 1000 speaker + 1x CBT 1000E Array
Connect 1 amplifier channel to each CBT 1000 + CBT 1000E array
-
+
(Barrier Strip
Input)
-
+
CBT 1000
CBT 1000
CBT 1000E