Operation Manual

8
REMOTE CONTROL FUNCTIONS
NOTE: Due to the variations in how DVD discs are authored, the
subtitle languages displayed by the DVD 37 may not accurately
reflect the actual languages available on the disc. It is recom-
m
ended that subtitles be selected using the disc’s menu.
Stereo Modes/Repeat: The first press of this button will select
the last-used Stereo mode, which may be Surround Off or Two-Channel
Processing. Each additional press will toggle between Surround Off,
5-Channel Stereo and 7-Channel Stereo. When an analog audio source
is in use and the AVR 245’s Tone Mode control has been set to Out,
you may also select Analog Bypass mode, which passes the analog
input signal to the volume control, bypassing digital signal processing.
See the AVR 245 manual for more information.
When the DVD player has been selected, each press of this button
cycles through the available Repeat modes, excluding A-B Repeat.
Track Skip: These buttons have no effect on the receiver, but are
used with the DVD 37 and many other source components to change
tracks or chapters.
Dim: Press this button to partially or fully dim the AVR 245’s front-
panel display.
Transport Controls: These buttons have no effect on the receiver
but are used to control the DVD 37 and many other source compo-
nents. By default, when the remote is operating the receiver, these
buttons will control the DVD 37.
Record: This button has no function on the AVR 245 or DVD 37.
It is used with many audio and video recorders.
Backlight: Press this button to illuminate the buttons on the remote.
Press it again to turn the backlight off, or wait for five seconds after the
last button press for the light to turn off on its own.
RCP4 remote OM.qxd 11/29/06 3:17 PM Page 8