Operation Manual

ManualsBrandsHarman Kardon ManualsAudioRCP4

(

seeks frequencies with acceptable signal strength) Tuning modes. It also

toggles between Stereo and Mono modes when an FM station is tuned.

When listening to XM Radio, press the Tuning Mode Button once to view

the category name of the current channel. Additional presses will display

the artist, song title and channel name.

When the DVD player has been selected, this button performs the Zoom

function. Press it to zoom in on a DVD, VCD or JPEG image. The image

may be enlarged by a factor of x2, x3, x4 or x5. Once the on-screen

indication of the zoom ratio disappears from the screen, you may use

the Navigation Buttons to explore the picture.

Memory/Playlist: After you have tuned a particular radio station, press

this button, then a Numeric Key, to save that station as a radio preset.

For XM Radio, the procedure for saving a preset is a little different. To

save the current channel in one of the 40 available preset locations,

press the Set Button repeatedly until PRESET SEARCH appears. Use

the

⁄/¤ Buttons to select a letter (A through E) representing one of

the five banks of preset memory slots. Then press the Memory Button,

followed by a Numeric Key (1 through 8) for the precise preset memory

location you wish to save the channel in.

When the DVD player has been selected, this button performs the

Playlist function,

which enables you to change the order in which tracks

or chapters are played.

Tuning: Press these buttons to tune a radio station or XM Radio

channel. For the AM and FM bands, and depending on whether the

tuning mode has been set to Manual or Automatic, each press will either

change one frequency step at a time, or seek the next frequency with

acceptable signal strength.

Direct Station Entry/Angle: Press this button before using

the Numeric Keys to directly enter a radio station frequency (AM or

FM bands only).

When the DVD player has been selected,

this button is used for the

Angle function.

Press it during passages on a DVD where the director

has programmed multiple camera angles to view the alternate perspec-

tives

. When a JPEG file is on-screen, each press of this button rotates

the image by 90 degrees clockwise

Clear: Press this Button to clear a radio station frequency you have

started to enter

When the DVD player has been selected, this button may be used

to clear any on-screen displays from view. In addition, press and hold

it for five seconds to reset all user settings on the DVD 37 to their

factory defaults.

Preset Stations Selector: Press these buttons to select a preset

radio station.

or XM

Radio, first press the Set Button repeatedly until PRESET SEARCH

appears, and then use the

⁄/¤ Buttons to select the letter of the

desired bank of presets.

Tone Mode/DVD Scan Type: Press this button to access the tone

controls (bass and treble). Use the Navigation Buttons to make your

elections.

When the DVD player has been selected, this button adjusts the Video

Scan Type setting for the component video outputs. Each press toggles

between progressive and interlaced scanning. This button is useful if you

inadvertently set the scan type to progressive when your video display

or television is not capable of displaying progressively scanned video.

Although your video display may be distorted, you may restore inter-

laced scanning by pressing this button.

Disc Skip: This button has no effect on the AVR 245 or the DVD 37,

but is used with some optical disc changers to skip to the next disc.

Macros: These buttons may be programmed to execute long com-

mand sequences with a single button press. They are useful for pro-

gramming the command to turn on or off all of your components, or for

accessing specialized functions for a different component than the one

you are currently operating.

Dolby

Surround Mode Selector: The first press of this button

will select the last-used Dolby Surround mode, and each additional

press will cycle through the variants that are currently available. Not

all modes are available with all sources; see the AVR 245 manual for

more infor

mation.

DTS

Surround Mode Selector/A-B Repeat: The first press of

this button will select the last-used DTS Digital mode if DTS processing is

available, and each additional press will toggle between the 2.0, 5.1 and

DTS-ES

variants. See the

AVR 245 manual for more information.

When the DVD player has been selected, this button serves the A-B

Repeat function. The first press while a disc is playing selects the begin-

ning of the passage you wish to repeat, and the second press selects

the end of the passage

The selected passage will play continuously until

the A-B Button is pressed a third time, or play is stopped.

DTS Neo:6

Surround Mode Selector: The first press of this

button will select the last-used DTS Neo:6 Surround mode if it is avail

able, and each additional press will cycle through the variants that are

currently available. See the AVR 245 manual for more information.

Logic 7

Surround Mode Selector/Random: The first press

of this button will select the last-used Logic 7 Surround mode if it is

available, and each additional press will cycle through the Cinema, Music

and Enhance modes

See the AVR 245 manual for more information.

When the DVD player has been selected, this button serves the Random

function.

When a CD is playing and no playlist is active, each press of

this button tur

ns random track selection on or off

Night Mode/Subtitle: Press this button to activate Night mode

with specially encoded Dolby Digital discs or broadcasts. Night mode

compresses the audio so that louder passages are reduced in volume

to avoid disturbing others

, while dialogue remains intelligible.

When the DVD player has been selected, this button performs the Subtitle

function. Press it to select a subtitle language or to turn subtitles off.

REMOTE CONTROL FUNCTIONS

RCP4 remote OM.qxd 11/29/06 3:17 PM Page 7