Operation Manual

User Manual
ediug
+yalp
™
GPS-910/810
7
ENGLISH
After the battery has charged for at least 6 hours:
1. Use the included USB cable to
connect the GPS-910/GPS-810
to your computer’s USB hub
(right).
2. Go to ww w.guideandplay.com.
3. Click on the Product Support
link.
4. Follow the instructions to
download the latest firmware
version into your GPS-910/GPS-810.
After the GPS-910/GPS-810’s firmware has been
updated:
1. Make sure the LOCK switch is in the DOWN (unlocked) position.
2. Go outdoors to obtain GPS reception.
3. Hold down the ON/OFF
button until the unit turns on.
1. Unlock
Switch
3. Turn Power
ON
2. Go Outside
to Receive
GPS Signal
TMC Antenna Jack
37069_HK_GPS910_810_eng:37069_GPS910_810_eng 04/06/08 18:25 Side 7
Downloaded from www.Manualslib.com manuals search engine