Operation Manual

BDS 280/580
6
BDS 280/580 Rear Panel Controls and Connections
Press this capacitive button to turn the BDS system ON. If the system is already ON, press
this button to push the system to Standby, Sleep or OFF mode.
The following table describes the different modes along with the LED display.
Mode Operation LED display
ON Press the power button White
Standby Long press on the power
button during Operational
mode (2.5 seconds)
Weak Amber
OFF Switch OFF of the Rear
panel rocker switch
OFF
Sleep • No activity for
15 minutes in
operational mode,
Auto-standby ON
• Short press of
Power button from
Front panel during
operational mode
• Short press on the
remote control
power button or
power off command
from external IR or
remote app
Amber
NOTE: While the system is powering on the volume ring will spin till the boot
process is complete.
5. NFC for Bluetooth pairing: Near Field Communication (NFC) is used for fast
Bluetooth pairing of compatible Android
TM
and Windows® mobile devices. Place the
mobile device near the NFC logo on the top front of the system to pair or unpair.
NOTE: The system can be brought to Operational mode from Sleep/Standby
mode by tapping on the NFC area.
6. Eject button (appears only when a disc has been inserted): Touch this button
to eject a disc from the BDS system’s built-in disc slot. Before touching this button, make
sure no objects block the disc-slot.
NOTE: If you do not remove the ejected disc within 30 seconds, it will
automatically re-load into the disc slot for protection.
7. Information display: Various messages appear on this display in response to
commands and to show the audio/video that is playing, the BDS system’s settings or
other aspects of the BDS system’s status as described throughout this manual.
BDS 280/580 Rear Panel Controls and Connections
BDS 280
BDS 580