Operation Manual

MULTIROOM OPERATION

MULTIROOM OPERATION 35

When the multiroom system is turned on, the input

selected using the multiroom menu will be fed to the

Multiroom Audio Outputs j on the rear panel as

well as the

A-BUS Jack ∞.The volume will be as set

in the previous selection, although it may also be

adjusted using an optional IR sensor and the Zone II

remote in the remote location, or the A-BUS keypad,

or on the optional audio power amplifier connected to

the

Multiroom Audio Outputs j.

Once the multiroom system is turned on, it will remain

on even if the AVR 325 is placed in the Standby

mode in the main room by pressing the

Power Off

Button

or the System Power Control 2 on

the front panel.To turn off the multiroom system, even

when the AVR is in Standby mode in the main listening

room, press the

Multiroom Button and then

the

Set Button p. Press the

⁄

Buttons n

so that the Multiroom Indicator D in the Main

Information Display

˜ goes out, and the Main

Information Display

˜ or OSD will display

MULTI OFF. Press the Set Button p to enter

the setting and turn the unit off.

Even when the AVR 325 is turned off in the main

room, the multiroom system may be turned on at any

time by pressing the

Multiroom Button , or any

of the

Selector Buttons

∫ç∂

in the

remote room.