Manual

Programming the Remote
Macro Programming • Pressthe MID3Input SelectorButton
Macrosenableyouto easilyrepeatfrequently _ to indicatethe nextcommandisto be
usedcombinationsof commandswith the press transmittedto the cablebox.
of a singlebutton ontheAVR120 remotecon- • Pressthe Mute Button _ to storethe
trol. Once3rogrammed,a macrowill sendout CablePowerOncommand.
upto 19 differentremotecodesin a oredeter- • Pressthe Sleep Button _ to complete
minedsequentialorder,enablingyouto auto- the processand storethe macrosequence.
matethe processof turning onyour system,
changingdevices,or othercommontasks.The
AVR120 remotecanstoreupto five separate
macrocommandsequences:onethat is
associatedwith the Power On Button q_),
andfour morethat areaccessedbypressingthe
Macro Buttons_.
1. Pressthe Mute Button _ and the
Macro Button _ to beprogrammedor
the Power On Button _) at the same
time. Notethat the last Input Selector
pressedwill licht red,andthe
ProgramIndicator _ will flashamber.
2. Enterthe stepsfor the macrosequenceby
pressingthe button for the actualcommand
step.Although the macromaycontain upto
19steps,eachbutton press,includingthose
After followingthese steps,eachtime you
pressthe Macro 1 Button _, the
remotewill sendthe PowerOn/Offcom-
mandto the AVR120,the televisionand
the cableboxwith a singlebutton press.
ErasingMacro Commands
Toerasethe commandsthat havebeenpro-
grammedintoone of the Macrobuttons,follow
thesesteps:
1. Pressthe Mute Button _ and the
Macro Button _ that containsthe
commandsyouwishto erase.
2. Notethat the ProgramIndicator I_ will
flash amber,andthe LEDunderthe AVR
Selector _ will turn red.
usedto changedevices,countsasa step.
TheProgramIndicator I_ will flash 3.Within ten seconds,pressthe Surround
greento confirmeachbutton pressas you Mode Selector/ChannelDown
entercommands. Button _).
NOTE:Whileenteringcommandsfor Power
On/Offof anydeviceduringa macrosequence,
pressthe Mute Button I_t. DONOTpressthe
actualPowerButton.
4. Thered _EDunderthe AVRSelector
wi go out, and the ProgramIndicator
will turn greenandflash threetimes
beforeit goesout.
3. When a the steps have been entered,
press the Sleep Button _ to enter the
commands. The red ight under the Input
Selectors _ will blink and then
turn off.
5.Whenthe ProgramIndicator _ goes
out,the Macrohasbeenerased.
Programmed DeviceFunctions
Oncethe AVR120'sremotehasbeenpro-
grammedfor the codesof otherdevices,press
Example:Toprogramthe Macro 1 Button theappropriateInputSelector _ to change
I_ sothat it turnsontheAVR120,TVand the remotefromcontrollingtheAVR120to con-
a CableBox,followthesesteps: trollingtheadditionalproduct.Whenyou press
• Pressthe Macro 1 _ and Mute _ anyoneof theselectors,it will brieflyflashin red
buttonsat the sametimeandthen release to indicatethat youhavechangedthe device
them.
• Notethat the ProgramIndicator I_
will flashambe_
• Pressthe AVRSelector I[_[).
• Pressthe Mute Button _ to storethe
AVR120'sPowerOncommand.
beingcontrolled.
Whenoperatinga deviceotherthan the
AVR120,the controlsmaynot correspond
exactlyto the functionprintedonthe remote
orbutton. Somecommands,suchas theVolume
harman/kardon
AVR120
/
• Pressthe MID2Input SelectorButton Control,arethe sameastheyarewith the
to indicatethe nextcommandisto be AVR120.Otherbuttonswill changetheir
transmittedto theTV. functionsothat they correspondto a secondary
• Pressthe Mute Button _ to storethe labelonthe remote.Forexample,the Sleep Thediagramaboveshowsthebuttonnumbersused
TVPowerOnCommanc and Surroundmodeselectorbuttonsalsofunc- intheFunctionListonpages31 and32.
tion as the Channel Up and Channel Down
28 PROGRAMMING THEREMOTE