User's Manual

4.3: AUX SENDS
CHANNELS > AUX SENDS
4.3: AUX SENDS
8L8L8VHU0DQXDO
35(32677DEOHWVRIWZDUH
Switch input channel’s Aux contribution between PRE and POST sources
AUX channels are pre-fader by default, meaning the volume faders on the MIX page do not aect the aux levels.
Press the PRE button to change individual channels to POST fader. A long press on the PRE/POST button opens a
dialog for ALL CHANNELS TO PRE or POST.
$8;6(1'087(7DEOHWVRIWZDUH
Mute the input channel’s contribution to this aux mix.
Separate to the normal input channel mute - only aects contribution to the selected aux mix.
0$8;&23<0,;
Copy the main mix to this aux mix
This button copies the fader positions from the MIX page and moves all aux send faders to the same position on
the AUX SENDS page. This is a handy starting point for an AUX mix rather than starting from all faders down.
You can press this button at any time if you want your monitor mix fader positions to resemble the MAIN mix. For
safety, user confirmation is required.