User's Manual

15www.jbl.com
English
• USB Update: You can search for and download new firmware on
your computer and transfer it to a USB memory device. Insert the
USB device into the JBL On Air Wireless’s USB port. Select USB
Update.
USB Memory
Device
USB Port
The JBL On Air Wireless will display the Install Software screen.
Press the Right Soft (OK) button to install the software; press the Left
Soft (Cancel) button to cancel the upgrade and return to the previous
menu screen.
IMPORTANT: Use the JBL On Air Wireless’s USB port only to perform
system updates. Do NOT connect it to a computer or any other type of
USB host/controller. You could damage the JBL On Air Wireless or the
host/controller device.
• Current Version: Select this option to display the version number of
the currently installed firmware. Press the Left Soft (Back) button to
return to the System Update screen.
System Reset
This menu lets you return your JBL On Air Wireless to its out-of-the-box
factory-default condition and erase all of your clock and alarm settings,
network settings, menu settings and FM radio preset stations. When
the JBL On Air Wireless completes the System Reset, it will return to
the Setup Wizard screen (see page 6).
Select Reset or the Right Soft (OK) button to reset the system; select
Cancel or the Left Soft (Back) button to cancel the system reset and
return to the previous menu screen.