® JBL On Air Wireless speaker with iPod/iPhone dock Owner’s Manual
Table of Contents Introduction Introduction 2 Connections 3 Controls and Display 4 Setup Wizard 6 Using Your JBL® On Air Wireless 8 Troubleshooting Your JBL On Air Wireless 16 Appendix: Manual Network Setup 17 Specifications 19 Important Note for All Electronic Products: Turn off the unit before inserting or unplugging audio cables from a source device’s headphones or line-level output jacks.
English Connections 1. C arefully unpack your JBL On Air Wireless and confirm that all the items shown here are included: 3. I f you are going to use your JBL On Air Wireless with another audio source, plug one end of a 3.5mm stereo cable (not included) into the JBL On Air Wireless’s Aux Input connector, and plug the other end into the audio source’s headphone-out or line-out connector. 3.
Controls and Display •V olume Up/Down buttons: Press these buttons to raise or lower the volume. Press both buttons simultaneously to mute the sound. When the sound is muted, press either the Volume Up or the Volume Down button to restore the sound. (NOTE: On the remote control, the mute function has its own button. See Remote Control Buttons, on page 5.) Controls Snooze/ Alarm Off •H ome button: Press this button to display the Home/Clock screen (see Main Display, on page 6).
English Remote Control Buttons Power Before using the remote control, remove the battery contact-protection strip by pulling on the tab. Volume Up/Down Soft Buttons Up Home Mute Left Right Down Previous Snooze OK Play/Pause Next Alarm Off • Previous, Play/Pause and Next buttons: When listening to AirPlay or an iPod device, press these buttons to skip to the previous song, play/pause the current song, or skip to the next song.
Main Display NOTE: The display screens shown throughout this manual are for illustrative purposes and may differ somewhat from the actual display screens. Language 1. Use the Up and Down buttons to highlight the your choice of language for the JBL On Air Wireless’s display. The Home/Clock screen is the JBL On Air Wireless’s main screen and is the base for all navigation.
English Time Zone This screen sets the JBL On Air Wireless’s clock to match the time zone in your area. 1. Use the Up and Down buttons to highlight the time zone you live in. 3. U se the Up and Down buttons to set the current minute, and press the OK button. • If the clock is in the 24-hour mode, the Day screen will appear. • I f the clock is in the 12-hour mode, AM/PM will be highlighted. Use the Up and Down buttons to set AM or PM, and press the OK button. The Day screen will appear. Day 1.
The Main Menu lets you scroll through and select the following items: FM, iPod, AirPlay, Aux and Settings. Use the Up, Down and OK buttons to highlight and select an item. 2. W hen the search is completed, the screen will display a list of up to four available networks. 3. U se the Up and Down buttons to highlight the network you want to use, and press the OK button to select it.
English 2. P ress the Up or Down button to tune up or down by one tuning increment. Hold down the button to tune up or down continually until you release the button. To save the currently tuned station as a preset: Press the Right Soft button. You can store up to 10 stations as presets. NOTE: Be sure to install the supplied adapter into the JBL On Air Wireless before docking your iPod/iPhone device (see illustration).
Listening to Streaming Audio from Your Computer Selecting “AirPlay” on the JBL On Air Wireless’s Main Menu lets you play audio files or an Internet radio station that is streaming from a networked computer. • Press the Left Soft (Previous) button to skip back. • Press the Right Soft (Next) button to skip ahead. • Press the Center Soft (Play/Pause) button to play/pause. NOTE: The computer must have the Apple iTunes application installed. To download the application, go to www.apple.com/iTunes.
English Settings Selecting “Settings” on the Main Menu screen displays the Settings Menu screen: Use the Up, Down, Left, Right and OK buttons to adjust the following items: • Alarm Time: Set the time you want the alarm to sound. This screen lets you configure your JBL On Air Wireless to operate the way you want it to. • Repeat: Set the alarm to repeat every day, weekdays only or weekends only, or turn the alarm off.
Time/Day Selecting “Time” displays the Main Time menu screen: Brightness Selecting “Brightness” displays the Brightness Setting screen: Use the Up, Down, Left, Right and OK buttons to adjust the following items: Use the Up, Down and OK buttons to highlight and select a display and button brightness level. • Time: Set the current time of day. You can also set the clock to operate in the 12-hour or 24-hour mode.
English Use the Up, Down and OK buttons to select a language for the JBL On Air Wireless’s display. The JBL On Air Wireless’s interface will immediately change to the selected language. Use the Up and Down buttons to scroll through the list. Use the OK button to select items, and use the Left button to return to the previous menu screen.
•W i-Fi Protected Setup™ (WPS): If your network router is WPScompatible, select this option to set up and configure the JBL On Air Wireless to work with your network automatically. • Add Network: Select this option to add a network manually. See Appendix: Manual Network Setup, on page 17, for more information. NOTE: If the JBL On Air Wireless is searching for available Wi-Fi networks when you select Add Network, the search will immediately stop.
English • US B Update: You can search for and download new firmware on your computer and transfer it to a USB memory device. Insert the USB device into the JBL On Air Wireless’s USB port. Select USB Update. IMPORTANT: Use the JBL On Air Wireless’s USB port only to perform system updates. Do NOT connect it to a computer or any other type of USB host/controller. You could damage the JBL On Air Wireless or the host/controller device.
Troubleshooting Your JBL On Air Wireless Problem Solution No sound (display is not illuminated): •M ake sure that the power supply is properly connected to the JBL On Air Wireless and to a working AC outlet. No sound (display is illuminated) : • Touch the Volume Up (+) button to increase the system volume. • I f you’re using FM radio, make sure that the included FM antenna is properly connected and that the JBL On Air Wireless is tuned to an active FM frequency.
English Problem Solution Sound comes from only one speaker: •M ake sure that the iPod/iPhone device is properly seated all the way into the docking connector. • Make sure that the audio cable is plugged all the way into the Aux Input jack. • Make sure that the audio cable is a stereo cable. The JBL On Air Wireless does not respond to any button presses: •P ress and hold the Snooze and Power buttons on the unit together for seven seconds to reset the unit’s microprocessor.
•D elete Connection: Select this option to delete a network from the system. Deleting a network stops the JBL On Air Wireless from automatically connecting to the network’s server and deletes all saved information related to the network. • I P Address Configuration: Select this to option configure the network’s IP address. The IP Address screen will appear: Select “Off” if the network does not have a proxy server. Select “On” if the network does have a proxy server.
English Specifications iPod/iPhone compatibility: Made for iPod nano 5th generation, iPod touch 2nd generation, iPod classic, iPod nano 4th generation, iPod touch 1st generation, iPod nano 3rd generation, iPod with video Made for iPhone 4, iPhone 3GS, iPhone 3G and iPhone Not compatible with iPod/iPhone video and photo playback The above information is correct as of the printing of this manual. Please check www.jbl.com for the latest compatibility information.
HARMAN Consumer, Inc. 8500 Balboa Boulevard, Northridge, CA 91329 USA www.jbl.com © 2010 HARMAN International Industries, Incorporated. All rights reserved. Features, specifications and appearance are subject to change without notice. JBL is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries. Apple, iPhone, iPod, iPod nano, iPod classic, iTunes and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.