Users Manual Part 5

#
To reduce the tyre pressure: press pres‐
sure release button 1 next to manometer
2.
#
When the tyre pressure is correct, unscrew
the filling hose from the valve of the sealed
tyre.
#
Screw the valve cap onto the valve of the
sealed tyre.
#
Pull the tyre sealant bottle out of the tyre
inflation compressor.
The filling hose stays on the tyre sealant bot‐
tle.
#
Drive to the nearest qualified specialist work‐
shop and have the tyre, tyre sealant bottle
and filling hose replaced there.
Battery (vehicle)
Notes on the 12 V battery
&
WARNING Risk of an accident due to
work carried out incorrectly on the bat‐
tery
Work carried out incorrectly on the battery
can, for example, lead to a short circuit. This
can restrict functions relevant for safety sys‐
tems and impair the operating safety of your
vehicle.
You could lose control of the vehicle in the
following situations in particular:
R
when braking
R
in the event of abrupt steering manoeu‐
vres and/or when the vehicle's speed is
not adapted to the road conditions
#
In the event of a short circuit or a simi‐
lar incident, contact a qualified special‐
ist workshop immediately.
#
Do not drive on.
#
Always have work on the battery carried
out at a qualified specialist workshop.
R
Further information on ABS (/ page 205)
R
Further information on ESP
®
(/ page 205)
For safety reasons, Mercedes-Benz recommends
that you only use batteries which have been tes‐
ted and approved for your vehicle by Mercedes-
Benz.
All vehicles except vehicles with a lithium-
ion battery
&
WARNING Risk of explosion due to elec‐
trostatic charge
Electrostatic charge can ignite the highly
explosive gas mixture in the battery.
#
To discharge any electrostatic charge
that may have built up, touch the metal
476
Breakdown assistance