Users Manual Part 5
Table Of Contents
- Wheels and tyres
- Notes on noise or unusual handling characteristics
- Notes on regularly inspecting wheels and tyres
- Notes on snow chains
- Activating or deactivating snow chain mode
- Tyre pressure
- Wheel change
- Notes on selecting, fitting and replacing tyres
- Notes on interchanging wheels
- Notes on storing wheels
- Overview of the tyre-change tool kit
- Preparing the vehicle for a wheel change
- Removing and fitting hub caps
- Raising the vehicle when changing a wheel
- Removing a wheel
- Fitting a new wheel
- Lowering the vehicle after a wheel change
- Emergency spare wheel
- Technical data
- Display messages and warning/indicator lamps
- Index
#
Unscrew screws 8 and remove fuse box lid
9 to the side.
Closing
#
Check whether the seal is positioned cor‐
rectly in lid 9.
#
Place lid 9 on the fuse box and tighten
screws 8.
#
Fold back bar 7 and tighten screws 6.
#
If present, engage hoses 5 in the retaining
clips in the engine compartment and vehicle
body.
#
If present, engage hoses 4 in the retaining
clips on the fuse box and vehicle body.
#
If present, insert electrical component 2
into the holder on the fuse box lid and
tighten screws 3.
#
Insert cover 1 and engage the rotary
catches.
Opening and closing the fuse box in the
cockpit
Requirements:
R
Observe the notes on electrical fuses
(/ page 486).
#
Open cover 1 in the direction of the arrow
and remove it.
Opening and closing the fuse box in the front
passenger footwell
Requirements:
R
Observe the notes on electrical fuses
(/ page 486).
Breakdown assistance
489