Users Manual Part 5
Table Of Contents
- Wheels and tyres
- Notes on noise or unusual handling characteristics
- Notes on regularly inspecting wheels and tyres
- Notes on snow chains
- Activating or deactivating snow chain mode
- Tyre pressure
- Wheel change
- Notes on selecting, fitting and replacing tyres
- Notes on interchanging wheels
- Notes on storing wheels
- Overview of the tyre-change tool kit
- Preparing the vehicle for a wheel change
- Removing and fitting hub caps
- Raising the vehicle when changing a wheel
- Removing a wheel
- Fitting a new wheel
- Lowering the vehicle after a wheel change
- Emergency spare wheel
- Technical data
- Display messages and warning/indicator lamps
- Index
Tyre pressure monitor
Warning/indicator lamp
Possible causes/consequences and M Solutions
h
Tyre pressure monitoring
system warning lamp
flashes
The yellow tyre pressure monitor warning lamp (pressure loss/malfunction) flashes for approximately one minute and
then remains lit.
*The tyre pressure monitor is malfunctioning.
&
WARNING There is a risk of an accident if the tyre pressure monitoring system is malfunctioning
The tyre pressure monitoring system cannot issue a warning if there is pressure loss in one or more of the tyres.
Tyres with insufficient tyre pressure may impair the driving characteristics as well as steering and braking.
#
Have the tyre pressure monitoring system checked at a qualified specialist workshop.
h
Tyre pressure monitoring
system warning lamp lights
up
The yellow tyre pressure monitoring system warning lamp (pressure loss/malfunction) is lit.
*The tyre pressure monitoring system has detected tyre pressure loss in at least one of the tyres.
&
WARNING Risk of an accident due to insufficient tyre pressure
R
The tyres can burst.
R
The tyres can wear excessively and/or unevenly.
R
The driving characteristics as well as the steering and braking may be greatly impaired.
You could then lose control of the vehicle.
#
Observe the recommended tyre pressures.
Display messages and warning/indicator lamps
649