Users Manual Part 5
Table Of Contents
- Wheels and tyres
- Notes on noise or unusual handling characteristics
- Notes on regularly inspecting wheels and tyres
- Notes on snow chains
- Activating or deactivating snow chain mode
- Tyre pressure
- Wheel change
- Notes on selecting, fitting and replacing tyres
- Notes on interchanging wheels
- Notes on storing wheels
- Overview of the tyre-change tool kit
- Preparing the vehicle for a wheel change
- Removing and fitting hub caps
- Raising the vehicle when changing a wheel
- Removing a wheel
- Fitting a new wheel
- Lowering the vehicle after a wheel change
- Emergency spare wheel
- Technical data
- Display messages and warning/indicator lamps
- Index
Warning/indicator lamp
Possible causes/consequences and M Solutions
ä
Suspension warning lamp
The red E-ACTIVE BODY CONTROL warning lamp is on.
*There is a fault in the E-ACTIVE BODY CONTROL.
*
NOTE The vehicle's driving characteristics have changed significantly.
#
Stop the vehicle immediately in accordance with the traffic conditions. Do not continue driving.
#
Note the messages on the driver's display.
#
Stop the vehicle immediately in accordance with the traffic conditions. Do not continue driving.
#
Consult a qualified specialist workshop.
Driving safety systems
Warning/indicator lamp
Possible causes/consequences and M Solutions
!
ABS warning lamp
The yellow ABS warning lamp is lit while the engine is running.
*ABS is malfunctioning.
If there is an additional warning tone, EBD is malfunctioning.
Other driving systems and driving safety systems may also be malfunctioning.
#
Note the messages on the driver's display.
646
Display messages and warning/indicator lamps