Users Manual Part 5
Table Of Contents
- Wheels and tyres
- Notes on noise or unusual handling characteristics
- Notes on regularly inspecting wheels and tyres
- Notes on snow chains
- Activating or deactivating snow chain mode
- Tyre pressure
- Wheel change
- Notes on selecting, fitting and replacing tyres
- Notes on interchanging wheels
- Notes on storing wheels
- Overview of the tyre-change tool kit
- Preparing the vehicle for a wheel change
- Removing and fitting hub caps
- Raising the vehicle when changing a wheel
- Removing a wheel
- Fitting a new wheel
- Lowering the vehicle after a wheel change
- Emergency spare wheel
- Technical data
- Display messages and warning/indicator lamps
- Index
Warning/indicator lamp
Possible causes/consequences and M Solutions
#
Do not top up the brake fluid.
Driving systems
Warning/indicator lamp
Possible causes/consequences and M Solutions
L
Warning lamp for distance
warning function
The red distance warning lamp lights up while the vehicle is in motion.
*The distance to the vehicle in front is too small for the speed selected.
If there is an additional warning tone, you are approaching an obstacle at too high a speed.
#
Be prepared to brake immediately.
#
Increase the distance.
Function of Active Brake Assist (/ page 208).
ä
Suspension warning lamp
The yellow AIRMATIC/E-ACTIVE BODY CONTROL warning lamp is lit.
* A fault has occurred in the AIRMATIC/E-ACTIVE BODY CONTROL.
#
Note the messages on the driver's display.
Display messages and warning/indicator lamps
645