Users Manual Part 5
Table Of Contents
- Wheels and tyres
- Notes on noise or unusual handling characteristics
- Notes on regularly inspecting wheels and tyres
- Notes on snow chains
- Activating or deactivating snow chain mode
- Tyre pressure
- Wheel change
- Notes on selecting, fitting and replacing tyres
- Notes on interchanging wheels
- Notes on storing wheels
- Overview of the tyre-change tool kit
- Preparing the vehicle for a wheel change
- Removing and fitting hub caps
- Raising the vehicle when changing a wheel
- Removing a wheel
- Fitting a new wheel
- Lowering the vehicle after a wheel change
- Emergency spare wheel
- Technical data
- Display messages and warning/indicator lamps
- Index
Display messages
Possible causes/consequences and M Solutions
#
Have the tyre pressure monitoring system checked at a qualified specialist workshop.
Tyre press. monitor inoper-
ative No wheel sensors
* The wheels fitted do not have suitable tyre pressure sensors. The tyre pressure monitor is deactivated.
#
Fit wheels with suitable tyre pressure sensors.
h
Wheel sensor(s) missing
* There is no signal from the tyre pressure sensor of one or more wheels. No pressure value is displayed for the
affected tyre.
#
Have the faulty tyre pressure sensor replaced at a qualified specialist workshop.
h
Check tyre(s)
* The tyre pressure in one or more tyres has dropped significantly. The wheel position will be displayed.
&
WARNING Risk of an accident due to insufficient tyre pressure
R
The tyres can burst.
R
The tyres can wear excessively and/or unevenly.
R
The driving characteristics as well as the steering and braking may be greatly impaired.
You could then lose control of the vehicle.
#
Observe the recommended tyre pressures.
#
Adjust the tyre pressure if necessary.
#
Stop the vehicle in accordance with the traffic conditions.
Display messages and warning/indicator lamps
627