Users Manual Part 5

#
Deactivate the automatic locking mechanism
(/ page 74).
#
Do not activate the HOLD function.
#
Deactivate tow-away protection
(/ page 95).
#
Deactivate Active Brake Assist (/ page 215).
#
Shift the automatic transmission to position
i.
#
Release the electric parking brake.
&
WARNING Risk of accident due to limi‐
ted safety-related functions during the
towing process
Safety-related functions are limited or no lon‐
ger available in the following situations:
R
the ignition is switched off.
R
the brake system or power steering sys‐
tem is malfunctioning.
R
the energy supply or the on-board electri‐
cal system is malfunctioning.
When your vehicle is then towed away, signif‐
icantly more effort may be required to steer
and brake than is normally required.
#
Use a tow bar.
#
Make sure that the steering wheel can
move freely, before towing the vehicle
away.
*
NOTE Damage due to excessive tractive
power
If you pull away sharply, the tractive power
may be too high and the vehicles could be
damaged.
#
Pull away slowly and smoothly.
Loading the vehicle for transport
#
Observe the notes on towing away
(/ page 483).
#
Connect the tow bar to the towing eye in
order to load the vehicle.
%
You can also attach the tow bar to the trailer
hitch.
#
Shift the automatic transmission to position
i.
%
The automatic transmission may be locked
in position j in the event of damage to the
electrics. To shift to i, provide the on-
board electrical system with power
(/ page 480).
#
Raise the vehicle in order to achieve greater
ground clearance .
#
Load the vehicle onto the transporter.
#
Shift the automatic transmission to position
j.
#
Use the electric parking brake to secure the
vehicle against rolling away.
#
Only secure the vehicle by the wheels.
484
Breakdown assistance