Users Manual Part 5
Table Of Contents
- Wheels and tyres
- Notes on noise or unusual handling characteristics
- Notes on regularly inspecting wheels and tyres
- Notes on snow chains
- Activating or deactivating snow chain mode
- Tyre pressure
- Wheel change
- Notes on selecting, fitting and replacing tyres
- Notes on interchanging wheels
- Notes on storing wheels
- Overview of the tyre-change tool kit
- Preparing the vehicle for a wheel change
- Removing and fitting hub caps
- Raising the vehicle when changing a wheel
- Removing a wheel
- Fitting a new wheel
- Lowering the vehicle after a wheel change
- Emergency spare wheel
- Technical data
- Display messages and warning/indicator lamps
- Index
Display messages
Possible causes/consequences and M Solutions
È
- - - km/h
* The limiter cannot be activated as not all activation conditions have been fulfilled.
#
Observe the activation conditions of the limiter (/ page 217).
Limiter inoperative
* The limiter is malfunctioning.
#
Consult a qualified specialist workshop.
Speed limit (winter tyres)
XXX km/h
* You have reached the maximum permissible stored speed for winter tyres. It is not possible to exceed this speed.
ð
Maximum speed exceeded
* You have exceeded the maximum permissible speed (for certain countries only).
#
Drive more slowly.
Display messages and warning/indicator lamps
617